Viking E-70-BK Card Reader Door Phone in Black

The Viking E-70-BK door phone features a built-in card reader. The card reader supports the 26-bit Wiegand standard for data output. Connect the reader to a compatible door controller to allow entry to the building. For unknown guests and visitors, the phoneâ intercom provides two-way communications from your office with the front door.

Flush mount the Viking E-70-BK phone in a double gang electrical box, or surface mount it in the optional VE-5x5 box. The phone offers intelligent call progress detection, so you can program the phone to hang-up through calling party control, silence, a busy signal or detected time out. Also adjust the microphone and speaker volumes. The built-in blue LED light lets you easily find the phone in the dark.

Viking E-70-BK Door Phone Quick Specs:

• Connectivity: analog
• Power: via telephone line or DC
• Wiring: gel-filled butt connectors
• CPC Disconnect: 300ms minimum
• Volume: max. 62db @ 1m
• Card Reader: built-in
• Data Format: 26-bit Wiegand
• Frequency: 125KHz
• Read Range: 1.25 to 2.0
• Operating Conditions: -30° to 150° F
• Dimensions: 2.84 x 1.8 x 1.65 (phone)
• 4.875 x 4.938 x 0.17 (faceplate)
• Mounting: flush in double gang box

Viking Electronics E-70-BK Door Intercom Package Contents:

• Viking E-70-BK door phone
• Faceplate in black
• LED light pipe
• 4x hexdrive flathead screws
• 1/4 foam faceplate gasket
• Circuit board mounting plate
• 2x double gang adapter plates

Viking E-70 Series Documentation:

• Viking E-70 Series Product Manual