CyberData 011095 VoIP Loudspeaker Amplifier AC V2

CyberData 011095 has been discontinued and is no longer available for purchase. The suggested replacement is CyberData 011404.

CyberData 011095 is a VoIP Loudspeaker Amplifier AC V2. The CyberData SIP-enabled VoIP loudspeaker amplifier provides an easy method for implementing an IP-based overhead paging systems for both new and legacy installations.

With up to 25 watts of driving power (802.3at), the CyberData 011095 amplifier provides direct drive of a standard horn speaker and supports a line-out connector for connection to an external amplifier.

The 011095's interface is compatible with most SIP-based IP PBX servers in compliance with the SIP RFC 3261. In non-SIP environments, the amplifier can be configured to listen to multicast address and port number combinations to form paging zones.

The V2 Loudspeaker Amplifier can also be configured as a Night Ringer with two SIP extensions. An extension can be assigned to a page group for automatic answer paging. A second extension can be assigned to a “First-to-Answerâ Night Ring group with IP phones. An audio ring file is activated when the second SIP extension of the amplifier is dialed. If any of the IP phones in the ring group are answered (or if the caller hangs up), the amplifier with stop ringing.