Talkaphone VOIP-600EI Flush-Mount 2-Button Outdoor IP Emergency Station

Talkaphone VOIP-600EI is a rugged, network-connected emergency phone with two buttons: EMERGENCY and INFO. VOIP-600EI meets the IP66 standard against dust and water ingress, making it suitable for indoor or outdoor installation. The faceplate is made from marine grade stainless steel and black UV-resistant PET for signage. It uses security screws to resist vandalism and improve device security. VOIP-600EI meets ADA standards for accessibility with raised and braille lettering. It provides incredible two-way audio both for intercom and paging functionality. The auto-dialer stores six numbers to call per button. The auto-answer lets security monitor and initiate calls at the station. VOIP-600EI can be used with the Talkaphone Wide-area Emergency Broadcast System (WEBS).

Talkaphone VOIP-600EI uses the open SIP communications protocol to integrate with your VoIP system. The station is configured and managed through the network using the simple web interface. Talkaphone has built in self-diagnostic technology, which allows the intercom to check the buttons, microphone, and speaker, so you'll always know that the call station is working properly. VOIP-600EI has two Ethernet ports, one to connect the station to the network and one to connect an additional device like an IP camera. It also has six I/O relays for other devices like door strikes.

Talkaphone VOIP-600EI Call Station Quick Specs:

• Connectivity Type: IP/VoIP
• Communications Protocol: SIP
• Ethernet Ports: 2x 10/100
• Additional Interfaces: 3x inputs, 3x outputs
• Power Over Ethernet: 802.3af
• Audio: full-duplex, 2-way, hands-free
• Audio Codecs: G.711, G.729a, G.723.1a
• Operating Temperature: -40°F - 131°F
• Durability Ratings: IP66

Talkaphone VOIP-600EI IP Emergency Station Package Contents:

• Talkaphone VOIP-600EI Call Station
• #10-24 T20 Torx Pin-Head Stainless Steel Screws
• #10-24 T20 Torx Pin-Head Black Anodized Stainless Steel Screws
• Ferrite Core