![Viking E-20TF-IP-EWP Touch-Free VoIP Entry Phone Viking E-20TF-IP-EWP Touch-Free VoIP Entry Phone](https://cdn11.bigcommerce.com/s-u3uxlvxq3h/images/stencil/400x400/products/9739/40525/Viking-E-20TF-IP__41596.1630446398.jpg?c=1)
Industry Best Pricing
Quantity discounts available
Have a question?
Quantity discounts available
Pre-sales product and solution advice
Add-on tech support plans available
Same day shipping on most orders
Viking E-20TF-IP is a touch-free IP intercom for entry control. E-20TF-IP uses a motion sensor to let the user activate the entry phone with just a wave of the hand — improve sanitation while making it easier to use. The motion sensor's ring LED lights indicate status — blue when idle, flashing green when dialing, steady green when connected. You can set the sensor's range to be from 1 to 4 inches — your choice.
Program the intercom through the network — supports the open SIP protocol. It handles up to 5 customizable numbers. The light gray cover is made from UV stable plastic to prevent fading. It has 2 Amp relay contacts — use with a door strike, strobe light or other peripheral. Connect the door entry phone to the IP network using a standard Ethernet cable — and power it via PoE. Viking E-20TF-IP comes with automatic polling and programming software.
E-20TF-IP is intended for surface mounting directly on a wall or flat-sided post. You can also surface mount it using a standard single gang box (not included) or standard 4" x 4" electrical junction box (not included).
© 2021 IP Phone Warehouse. All rights reserved, including the right to reproduce this product description or portions thereof in any form whatsoever.