Viking SA-X12 Self-Amplified Paging Expander/Adapter

Viking SA-X12 expands existing analog paging systems while improving them by adding remote volume control. Connect SA-X12 to an existing paging audio source. The adapter combines the audio signal with power to drive up to 12 Viking SA-1S Ceiling Speakers or Viking SA-1H Horn Speakers. These self-amplified speakers are professional paging solutions. The adapter uses the proprietary Viking 40V two wire protocol, which means it drives audio and power on the same cable: less copper required.

SA-X12 also enables wireless paging speaker volume control using a Viking SA-IR Infrared Remote Control (not included). That makes adjusting the volume on the paging speakers as simple as turning the volume up or down on your TV at home. SA-X12 works with a wide variety of analog paging systems, including 600 Ohm line level, 4/8/16 Ohm, and 25V/70V systems.

© 2025 IP Phone Warehouse. All rights reserved, including the right to reproduce this product description or portions thereof in any form whatsoever.

Viking SA-X12 Quick Specs:

• Paging Output Protocols: Viking 40V two wire
• Speakers: up to 12 self-amplified speakers
• Talk Battery Output: 40V DC
• Connections:
• 1x 2.1 mm barrel jack
• 6x cage clamp screw terminals

Viking SA-X12 Self-Amplified Paging Expander/Adapter Package Contents:

• Paging Expander/Adapter
• Power Adapter

Viking SA-X12 Documentation:

• Viking SA-X12 Product Manual